Uses:
• Bonding various materials.
Directions:
1. Surface must be clean and dry. Working surface and can must be at room temperature (60°-65°F).
2. Protect areas from overspray.
3. Adjust nozzle to desired width and direction.
4. Hold can 5”-7” from surfaces and spray both surfaces to be bonded with an overlapping motion.
5. Allow solvent to escape for 2-3 minutes, but not more than 15 minutes.
6. Encourage bonding by applying firm pressure.
7. When finished, invert can and spray to clean nozzle.
Packaging:
20 oz (#C2041) 12/case
