-
Uses: • Auto • Marine • Trailer • Home • RV's • Hunting Gear • Basement • Paint/VOC's • Mold/Mildew • Smoke/Tobacco • Cooking/Food • Pets/Skunks • Urine • Septic/Sewer • Flood Damage Preparation & Set-Up: 1. For maximum results, place vehicle out of direct sunlight, block all windows or treat overnight. 2. Treatment temperature range is between 50° F and 90° F. Pre-heat or cool down as needed. 3. Clean & vacuum vehicle, including trunk and remove any source of odor problem. 4. Stand floor mats up on end. 5. Properly fill out supplied warning placards and secure to main entry door. Treatment: 1. Place clear plastic holder in vehicle on center console. DO NOT PLACE ON CARPET. 2. Pour HOT tap water to fill line. DO NOT OVERFILL! 3. Remove deodorizing packet from foil wrapper (do not cut packet) and gently place BLUE side facing down into the water. Packet will immediately start to expand. Leave holder OPEN during treatment. 4. After activating packet, close and lock all doors so car is air-tight. Do not enter space at any time during treatment. 5. Minimum treatment is 6 hours. For maximum results, treat overnight. Air-Out Procedure: 1. At end of treatment, open all doors and allow vehicle to air out for one-hour. 2. After initial air out CLOSE HOLDER. Remaining liquid is an oxidizer- do not spill. Dispose of holder in an outdoor refuse container. Packet is biodegradable and holder is #3 plastic & recyclable. 3. Start vehicle, turn ventilation system on high and allow the vehicle to air out with doors open for an additional 5 minutes. -
Uses: • Anywhere rust or corrosion threatens metal Directions: 1. Make sure surface is dry and clean. Remove all loose rust and dirt. 2. Apply CS-1 using a brush or with Castle® spray gun (Part# X032-001). 3. Allow to cure to a durable film for at least 1 hour. Packaging: 1 gal (#C101128) 4/case 5 gal (#C10105) pail 55 gal (#C10155) drum -
Uses: • Intake Valves • Combustion Chamber Directions: 1. Make sure engine is warm. 2. Remove air intake boot to expose throttle plate. With the engine off, spray the throttle plate and air intake area with Castle® GDI/IVD Clean™ to remove deposits. Wipe dry with a shop towel. 3. Start engine and spray the remainder of Castle® GDI/IVD Clean™ to clean intake valves and combustion chamber by spraying the cleaner in the throttle body in bursts, while maintaining R.P.M.’s at 1200 to 1500 to prevent stalling. Packaging: 8 oz (#C0878) 12/case -
Uses: • Automotive • Farm • Home • Striker Plates • Industrial • Chains • Brake Parts • Conveyors • Marine • Lawn Equipment • Door & Hood Hinges • Tools Directions: 1. Shake well. 2. Spray on surface to be lubricated. 3. Use extension tube for pin point application or hard to reach places. Packaging: 8 oz (#C0802) 12/case 16 oz (#C1602) 12/case -
Uses: • Head Bolts • Spark Plugs • Machinery • Exhaust Manifold • Swing Set • Brake Calipers Directions: 1. Shake well before using. 2. Completely cover part to be protected. 3. Assemble part. 4. Clear until valve when finished by inverting can and spraying until only pressure escapes. Packaging: 16 oz (#C1625) 12/case -
Uses: • Auto • Marine • Manufacturing • Lawn Equipment • Bus • Truck • Heavy Machinery • Home • RV’s Directions: 1. Spray Thrust™ on rusted, corroded, or frozen part. 2. Let set 3 minutes. 3. Remove part. 4. In bulk, can be brushed on. Packaging: 8 oz (#C0805) 12/case 20 oz (#C2005) 12/case 1 gal (#C12819) 4/case 15 gal (#C12819-15P) drum 55 gal (#C12819-55) drum -
Uses: • Auto • Windows • Doors • Drawers • Snow Blowers • Boats • Industry • Home • Canvas • Rust Proofs Tools • Recreational Vehicles Directions: 1. As a Lubricant: Spray on problem area. 2. As a Protectant: Spray on and rub into area to be protected. Packaging: 8 oz (#C0803) 12/case 16 oz (#C1603) 12/case -
Uses: • Wood • Metal • See Can for More Uses • Most plastic • Ceramic Directions: 1. Surfaces should be clean and dry. 2. Shake can well (35-40 seconds). 3. Room temperature - hold can 6-8 inches from surface. 4. Allow surface to dry before exposing to stress. 5. Invert can, spray to clear nozzle when finished. Packaging: 20 oz (#C2015) 12/case