Uses:
• Auto • Marine • Trailer
• Home • RV's • Hunting Gear
• Basement • Paint/VOC's • Mold/Mildew
• Smoke/Tobacco • Cooking/Food • Pets/Skunks
• Urine • Septic/Sewer • Flood Damage
Preparation & Set-Up:
1. For maximum results, place vehicle out of direct sunlight, block all windows or treat overnight.
2. Treatment temperature range is between 50° F and 90° F. Pre-heat or cool down as needed.
3. Clean & vacuum vehicle, including trunk and remove any source of odor problem.
4. Stand floor mats up on end.
5. Properly fill out supplied warning placards and secure to main entry door.
Treatment:
1. Place clear plastic holder in vehicle on center console. DO NOT PLACE ON CARPET.
2. Pour HOT tap water to fill line. DO NOT OVERFILL!
3. Remove deodorizing packet from foil wrapper (do not cut packet) and gently place BLUE side facing down into the water. Packet will immediately start to expand. Leave holder OPEN during treatment.
4. After activating packet, close and lock all doors so car is air-tight. Do not enter space at any time during treatment.
5. Minimum treatment is 6 hours. For maximum results, treat overnight.
Air-Out Procedure:
1. At end of treatment, open all doors and allow vehicle to air out for one-hour.
2. After initial air out CLOSE HOLDER. Remaining liquid is an oxidizer- do not spill. Dispose of holder in an outdoor refuse container. Packet is biodegradable and holder is #3 plastic & recyclable.
3. Start vehicle, turn ventilation system on high and allow the vehicle to air out with doors open for an additional 5 minutes.
Uses: • Auto Interior • Tires • Boat Interior • Rubber Bumper Guards Directions: 1. Shake well. 2. Clean surface to be treated. 3. Remove cap and spray a thin film on surface from 8-10 inches away. 4. Wipe away excess with a clean cloth. Packaging: 20 oz aerosol (#C2043) 12/case
Uses: • Disc Brake Calipers • Gaskets & O Rings • Guide Rails • Universal Joints • Ball Joints • Winches Directions: 1. Clean brake parts With Castle® Brake Bath™ . 2. Apply to all parts necessary. 3. Spread evenly to avoid build-up / clumping. Packaging: 8 oz (#C0839) 12/case
Uses: • As a lubricant for today’s automotive braking systems. Directions: 1. Make sure metal is clean and dry. 2. Apply Silver Anti Seize to both surfaces. 3. Assemble parts to the correct torque. Packaging: 8 oz (#C0840) 12/case
Uses: • Cars • Trucks • RV's • Boats • Buses • Shoes • Other Leather Surfaces Directions: 1. Apply with a clean, soft cloth until product is absorbed. 2. Wipe off any excess. Packaging: 30 fl. oz. (#C82030) 12/case
Uses: • Auto • Marine • Trailer • Home • RV's • Hunting Gear • Basement • Paint/VOC's • Mold/Mildew • Smoke/Tobacco • Cooking/Food • Pets/Skunks • Urine • Septic/Sewer • Flood Damage Preparation & Set-Up: 1. For maximum results, place vehicle out of direct sunlight, block all windows or treat overnight. 2. Treatment temperature range is between 50° F and 90° F. Pre-heat or cool down as needed. 3. Clean & vacuum vehicle, including trunk and remove any source of odor problem. 4. Stand floor mats up on end. 5. Properly fill out supplied warning placards and secure to main entry door. Treatment: 1. Place clear plastic holder in vehicle on center console. DO NOT PLACE ON CARPET. 2. Pour HOT tap water to fill line. DO NOT OVERFILL! 3. Remove deodorizing packet from foil wrapper (do not cut packet) and gently place BLUE side facing down into the water. Packet will immediately start to expand. Leave holder OPEN during treatment. 4. After activating packet, close and lock all doors so car is air-tight. Do not enter space at any time during treatment. 5. Minimum treatment is 6 hours. For maximum results, treat overnight. Air-Out Procedure: 1. At end of treatment, open all doors and allow vehicle to air out for one-hour. 2. After initial air out CLOSE HOLDER. Remaining liquid is an oxidizer- do not spill. Dispose of holder in an outdoor refuse container. Packet is biodegradable and holder is #3 plastic & recyclable. 3. Start vehicle, turn ventilation system on high and allow the vehicle to air out with doors open for an additional 5 minutes.
Uses: • Anywhere rust or corrosion threatens metal Directions: 1. Make sure surface is dry and clean. Remove all loose rust and dirt. 2. Apply CS-1 using a brush or with Castle® spray gun (Part# X032-001). 3. Allow to cure to a durable film for at least 1 hour. Packaging: 1 gal (#C101128) 4/case 5 gal (#C10105) pail 55 gal (#C10155) drum
