-
Uses: • Automotive • Home • Industry • Marine • Sporting Equipment • Electronic • Aircraft • Farm Directions: 1. Check back of can for suggestions. Packaging: 8 oz (#C0811) 12/case 20 oz (#C2011) 12/case 1 gal (#C12811) 4/case -
Uses: • Auto • Truck • Boats • RV's • Tractor Equipment Directions: 1. Vehicle surfaces should be cool and out of the sun. 2. Pour 4 oz. into a clean empty bucket. 3. Pre-rinse the vehicle. 4. Wash with a brush or mitt. 5. Rinse thoroughly. 6. Dry with towel or Castle® Pro Wipe Chamois. Packaging: 1 gallon (#C44) 4/case Bulk sizes (5, 15, 30, and 55 gallons) -
Uses: • Trucks • Buses • Industrial Applications • Painted Surfaces • Railroad Cars • Aluminum Siding • Recreational Vehicles Directions: 1. Simply spray on and rinse off. 2. In heavy soot or dirt conditions, brush lightly before rinsing. Packaging: 1 gal (#C73128) 4/case 5 gal (#C7305) pail 15 gal (#C7315) drum 30 gal (#C7330) drum 55 gal (#C7355) drum -
Uses: • Cars • Trucks & Buses • Boats • RV’s • Aluminum Siding Directions: 1. Vehicle surface should be cool and out of the sun. 2. Pour 2 ounces of Spotless into a clean empty bucket. 3. Activate suds with a strong stream of water (approx. 3 gallons). 4. Wash one section at a time with suds, starting at the top. 5. Hose off thoroughly after each section. Rinse with Castle® Seal Spray Wax to leave a protective coating between washes. 6. Wipe off with a chamois. 7. Replace water in bucket throughout the day, never adding more Spotless™ Car Wash. 8. For automatic car wash, dilute ¼ oz per gallon of water. Packaging: 12 oz (#FLSC7012) 24/case 1 gal (#FLSC70128) 4/case 5 gal (#FLSC7005) pail 15 gal (#FLSC7015) drum 30 gal (#FLSC7030) drum 55 gal (#FLSC7055) drum -
Uses: • Any Vehicle Exterior • Boat Exterior • Aluminum Siding Directions for Manual Wash: Directions for Manual Wash: 1. Hose off surface to be cleaned. 2. Pour 1 cup of powder into 5 gallon bucket. 3. Hit powder with strong water pressure until suds reach top. Directions for Commercial Wash: 1. For pre-rinse, add 3 lbs. per 50 gallons of water and inject into pre-rinse station at adjusted dilution for soil conditions using hot or cold water. 2. For brush feed applications, add 2 lbs. per 100 gallons of water contained in solution tank. 3. Rinse vehicle surface before adding rinse wax to surface. Packaging: 8 lb (#C9010) tub 30 lb (#C9030) tub 90 lb (#C9090) tub 300 lb (#C90350) tub -
Uses: • Low profile and run flat tire mounting • Alloy wheel tire mounting Directions: 1. Using a swab or brush, apply to tire beads and both bead ledges. 2. To demount, after the bead is broken from the rim and before demounting, apply to bead with swab or brush. Packaging: 8 lbs (#C2008-9) -
Uses: • Terrazzo • Mastic • Asphalt • Ceramic • Concrete • Brick Directions: 1. Strip floor with Castle’s Liquid Concrete Cleaner or CCP. 2. Rinse thoroughly, allowing time to dry. 3. Apply thin coat with clean mop or wax pad. 4. Let dry and apply a thin second coat. 5. Air dry time at 77°F, 50% humidity. 6. Set to touch in 2 hours, dry hard - 24 hours. 7. Coverage is 300-500 square feet depending on porosity. Packaging: 1 gal (#C52128) 4/case 5 gal (#C5205) pail 15 gal (#C5215) drum 55 gal (#C5255) drum -
Uses: • Seal Boxes • Headliners • Carpets • Gasket Adhesives Directions: 1. Shake product well before using. 2. Spray, holding Trim Stick™ 6-8 inches from surface. 3. Be sure to spray both surfaces. 4. Let set for 60 seconds before mounting. 5. When done, clear out by inverting can and spraying until valve is clear. Packaging: 20 oz (#C2006) 12/case -
Uses: • Auto • Truck • Tractor • Marine • Home • Industry Directions: 1. Be sure surface is free of foreign matter. 2. While belt is moving at idle speed, spray a light application to inside surface. 3. Repeat application at regular intervals to maintain traction. Packaging: 16 oz (#C1615) 12/case -
Uses: • Brake pads Directions For New Pads: 1. Shake can well. 2. Spray pad to saturate, let dry, and reapply. 3. Allow pad to dry to touch before assembly (about 10-12 minutes). Directions For Used Pads: 1. Pad must be scuffed to allow penetration of Squeal-X™. 2. Because of glazing of a used pad, Squeal-X™ may not eliminate the squeal entirely. 3. It is necessary to saturate 100% of the pad. Packaging: 6 oz (#C0602) 12/case -
Uses: • Cars • Buses • Trucks • Any enclosed cooling system Directions: 1. Shake well. 2. Bring engine to operating temperature with the cap off. 3. Pour entire bottle in and allow it to circulate until the leak stops. 4. One bottle is enough for cars; trucks will take proportionally more. Packaging: 12 oz (#C1236) 24/case -
Uses: • Cars • Trucks • Motorcycles Directions: 1. Spray the back of the pad with an even coat. 2. Allow QT™ to dry until it is sticky, but not wet. 3. DO NOT SPRAY ON THE FACE OF THE PAD Packaging: 16 oz (#C1627) 12/case
