-
Uses: • School • Telephones • Nursing Homes • Hotels / Motels • Garages • Hospitals • Laboratories Directions: 1. Shake can well before using. 2. Pre-clean, removing all soil deposits from surfaces and spray until wet. 3. Allow to remain wet for 10 minutes. 4. Let dry and repeat from time to time as required. 5. As an air freshener: aim can upward to center of room and spray for one or two seconds. Packaging: 20 oz (#C2024) 12/case -
Uses: • Auto • Marine • Manufacturing • Lawn Equipment • Bus • Truck • Heavy Machinery • Home • RV’s Directions: 1. Spray Thrust™ on rusted, corroded, or frozen part. 2. Let set 3 minutes. 3. Remove part. 4. In bulk, can be brushed on. Packaging: 8 oz (#C0805) 12/case 20 oz (#C2005) 12/case 1 gal (#C12819) 4/case 15 gal (#C12819-15P) drum 55 gal (#C12819-55) drum -
Uses: • School • Motels • Industry • Mobile Homes • Porcelain • Fiber Glass • Ceramic Tile • Exercise Centers • Terrazzo • Fixtures • Chrome • Locker Rooms Directions: 1. Mix 6 ounces per gallon. 2. Spray on and let set. 3. Agitate to loosen film. 4. Rinse off. Packaging: 22 oz (#C63022) 12/case 1 gal (#C63128) 4/case 5 gal (#C6305) pail 15 gal (#C6315P) drum 30 gal (#C6330P) drum 55 gal (#C6355P) drum -
Uses: • Autos • Trucks • Trailers • Motorcycles • Motor Homes • Recreational Vehicles Directions: 1. Shake well. 2. Spray evenly on a clean or dirty tire. 3. Allow 15 minutes for drying and leveling time. 4. Avoid spraying on brakes, tire tread, and floors. 5. Hose off residue from garage floor or driveway. Packaging: 16 oz (#C1645) 12/case -
Uses: • Head Bolts • Spark Plugs • Machinery • Exhaust Manifold • Swing Set • Brake Calipers Directions: 1. Shake well before using. 2. Completely cover part to be protected. 3. Assemble part. 4. Clear until valve when finished by inverting can and spraying until only pressure escapes. Packaging: 16 oz (#C1625) 12/case -
Uses: • Seal Boxes • Headliners • Carpets • Gasket Adhesives Directions: 1. Shake product well before using. 2. Spray, holding Trim Stick™ 6-8 inches from surface. 3. Be sure to spray both surfaces. 4. Let set for 60 seconds before mounting. 5. When done, clear out by inverting can and spraying until valve is clear. Packaging: 20 oz (#C2006) 12/case -
Directions: For Hard Surfaces: 1. Use full strength. For Rugs, Upholstery, and Cloth Surfaces: 1. A small area of the surface should be tested prior to general use to assure surface is colorfast. 2. Spray a light coating onto surface to be cleaned. 3. Brush in a circular motion. 4. Wipe dry with a clean cloth. Caution: Not for use on glass. Packaging: 32 oz. spray bottle 12/case Caution: When handling this product, gloves and eye protection are recommended. This is a high pH product. Do not use full strength product on glass. -
Uses: • Automobiles • Trucks • Buses • RV’s • Boats • Painted metal or fiberglass surface. Directions: 1. Surface should be clean, cool, and dry. 2. With damp sponge, apply in circular motion. 3. Dry to haze. 4. Wipe with clean cloth. 5. For oxidized finish, first use Castle® Clear Wax™ or Seal Glaze™. Packaging: 16 oz (#C1644) 12/case 1 gal (#C12818) 4/case