-
Uses: • Auto • Marine • Tractor • Snow Blowers • RV’s • Aviation • Industrial • Snowmobiles Directions: 1. Insert red tip nozzle into keyhole and push against lock. 2. To treat severe icing, repeat procedure. 3. Allow a few moments for thawing action. Packaging: 24 of the 5/8 oz cylinder/box(#C0751) -
Uses: • All Automotive Types • CFC Free • ABS Sensor Safe • Effective from –60° F to 1200° F Directions: 1. Perform complete brake job and thoroughly clean all surfaces. 2. Spray a light mist of Castle® Meta-Seal™ making sure not to saturate. 3. Apply directly to rotors/drums and pads/shoes. 4. Complete assembly and installation. 5. Apply brakes several times at low speed to burnish the Castle® Meta-SeaL™ particles into the friction surfaces. Packaging: 20 oz (#C2093) 12/case -
Uses: • Cars • Buses • Trucks • Any enclosed cooling system Directions: 1. Shake well. 2. Bring engine to operating temperature with the cap off. 3. Pour entire bottle in and allow it to circulate until the leak stops. 4. One bottle is enough for cars; trucks will take proportionally more. Packaging: 12 oz (#C1236) 24/case -
Uses: • Brake pads Directions For New Pads: 1. Shake can well. 2. Spray pad to saturate, let dry, and reapply. 3. Allow pad to dry to touch before assembly (about 10-12 minutes). Directions For Used Pads: 1. Pad must be scuffed to allow penetration of Squeal-X™. 2. Because of glazing of a used pad, Squeal-X™ may not eliminate the squeal entirely. 3. It is necessary to saturate 100% of the pad. Packaging: 6 oz (#C0602) 12/case -
Uses: • Seal Boxes • Headliners • Carpets • Gasket Adhesives Directions: 1. Shake product well before using. 2. Spray, holding Trim Stick™ 6-8 inches from surface. 3. Be sure to spray both surfaces. 4. Let set for 60 seconds before mounting. 5. When done, clear out by inverting can and spraying until valve is clear. Packaging: 20 oz (#C2006) 12/case -
Uses: • Terrazzo • Mastic • Asphalt • Ceramic • Concrete • Brick Directions: 1. Strip floor with Castle’s Liquid Concrete Cleaner or CCP. 2. Rinse thoroughly, allowing time to dry. 3. Apply thin coat with clean mop or wax pad. 4. Let dry and apply a thin second coat. 5. Air dry time at 77°F, 50% humidity. 6. Set to touch in 2 hours, dry hard - 24 hours. 7. Coverage is 300-500 square feet depending on porosity. Packaging: 1 gal (#C52128) 4/case 5 gal (#C5205) pail 15 gal (#C5215) drum 55 gal (#C5255) drum -
Uses: • Auto • Trucks • Boats • RV’s • Tractor Equipment Directions: 1. Pour 3 oz into a clean empty 5 gal bucket. 2. Fill bucket with a hard spray from hose. 3. Presoak Vehicle. 4. Use a Castle® Wash Mitt to apply and clean vehicle. Rinse and dry with Castle® Chamois. Packaging: 18 oz (#C46018) 12/case 1 gal (#C46128) 4/case 5 gal (#C4605) pail 15 gal (#C4615P) drum 30 gal (#C4630P) drum 55 gal (#C4655) drum -
Uses: • Auto • Truck • Boats • RV’s • Tractors • Equipment Directions: 1. Vehicle should be cool and out of direct sun. 2. Pour 4oz into clean empty 5 gallon bucket. 3. Fill bucket with hard spray from hose. 4. Pre-soak vehicle, use wash mitt or horse hair brush. Rinse and dry with soft towel or Castle Chamois. Packaging: 5 gal (#DE09001-5) pail 15 gal (#DE09001-15) drum 30 gal (#DE09001-30) drum 55 gal (#DE09001) drum