-
Uses: • Auto • Marine • Trailer • Home • RV's • Hunting Gear • Basement • Paint/VOC's • Mold/Mildew • Smoke/Tobacco • Cooking/Food • Pets/Skunks • Urine • Septic/Sewer • Flood Damage Preparation & Set-Up: 1. For maximum results, place vehicle out of direct sunlight, block all windows or treat overnight. 2. Treatment temperature range is between 50° F and 90° F. Pre-heat or cool down as needed. 3. Clean & vacuum vehicle, including trunk and remove any source of odor problem. 4. Stand floor mats up on end. 5. Properly fill out supplied warning placards and secure to main entry door. Treatment: 1. Place clear plastic holder in vehicle on center console. DO NOT PLACE ON CARPET. 2. Pour HOT tap water to fill line. DO NOT OVERFILL! 3. Remove deodorizing packet from foil wrapper (do not cut packet) and gently place BLUE side facing down into the water. Packet will immediately start to expand. Leave holder OPEN during treatment. 4. After activating packet, close and lock all doors so car is air-tight. Do not enter space at any time during treatment. 5. Minimum treatment is 6 hours. For maximum results, treat overnight. Air-Out Procedure: 1. At end of treatment, open all doors and allow vehicle to air out for one-hour. 2. After initial air out CLOSE HOLDER. Remaining liquid is an oxidizer- do not spill. Dispose of holder in an outdoor refuse container. Packet is biodegradable and holder is #3 plastic & recyclable. 3. Start vehicle, turn ventilation system on high and allow the vehicle to air out with doors open for an additional 5 minutes. -
Uses: • Cars • Trucks • RV's • Boats • Buses • Shoes • Other Leather Surfaces Directions: 1. Apply with a clean, soft cloth until product is absorbed. 2. Wipe off any excess. Packaging: 30 fl. oz. (#C82030) 12/case -
Uses: • Automotive Parts • Cutting Tools • Locks • Gearboxes • Machine Parts Directions: 1. Surfaces should be clean and dry 2. Shake can well (35-40 seconds) 3. Room temperature - hold can 6-8 inches from surface 4. Allow surface to dry before exposing to stress 5. Invert can, spray to clear nozzle when finished Packaging: 20oz (#C2065) 12/case -
Uses:- Bathrooms • Dealerships • Municipalities
- Hospitals • Garages • Nursing Homes
- Schools • Restaurants • Industry
- Pump a small amount of foam into palm of hand
- Rub thoroughly over all surfaces of both hands
- Rinse with water and towel dry
-
Uses: • As a lubricant for today’s automotive braking systems. Directions: 1. Make sure metal is clean and dry. 2. Apply Silver Anti Seize to both surfaces. 3. Assemble parts to the correct torque. Packaging: 8 oz (#C0840) 12/case -
Uses: • Disc Brake Calipers • Gaskets & O Rings • Guide Rails • Universal Joints • Ball Joints • Winches Directions: 1. Clean brake parts With Castle® Brake Bath™ . 2. Apply to all parts necessary. 3. Spread evenly to avoid build-up / clumping. Packaging: 8 oz (#C0839) 12/case -
Uses: • Auto Interior • Tires • Boat Interior • Rubber Bumper Guards Directions: 1. Shake well. 2. Clean surface to be treated. 3. Remove cap and spray a thin film on surface from 8-10 inches away. 4. Wipe away excess with a clean cloth. Packaging: 20 oz aerosol (#C2043) 12/case -
Uses: • Sealed Hardwood Floors • Vinyl Floors • Laminate Floors • Ceramic, Porcelain, and Glass Tile • All Sealed Natural Stone Floors • Bamboo Floors Directions: 1. May be diluted up to 3:1. Spray onto the floor and mop up. Rinse with clean water if necessary. Packaging: 1 Gallon (C86128) 4/Case
