Products Archive - Page 2 of 3

Castle Thrust

Uses: • Auto • Marine • Manufacturing • Lawn Equipment • Bus • Truck • Heavy Machinery • Home • RV’s Directions: 1. Spray Thrust™ on rusted, corroded, or frozen part. 2. Let set 3 minutes. 3. Remove part. 4. In bulk, can be brushed on. Packaging: 8 oz (#C0805) 12/case 20 oz (#C2005) 12/case 1 gal (#C12819) 4/case 15 gal (#C12819-15P) drum 55 gal (#C12819-55) drum

Details

Castle GDI/IVD Clean

Uses: • Intake Valves • Combustion Chamber Directions: 1. Make sure engine is warm. 2. Remove air intake boot to expose throttle plate. With the engine off, spray the throttle plate and air intake area with Castle® GDI/IVD Clean™ to remove deposits. Wipe dry with a shop towel. 3. Start engine and spray the remainder of Castle® GDI/IVD Clean™ to clean intake valves and combustion chamber by spraying the cleaner in the throttle body in bursts, while maintaining R.P.M.’s at 1200 to 1500 to prevent stalling. Packaging: 8 oz (#C0878) 12/case

Details

Castle CS-1 Corrosion Shield

Uses: • Anywhere rust or corrosion threatens metal Directions: 1. Make sure surface is dry and clean. Remove all loose rust and dirt. 2. Apply CS-1 using a brush or with Castle® spray gun (Part# X032-001). 3. Allow to cure to a durable film for at least 1 hour. Packaging: 1 gal (#C101128) 4/case 5 gal (#C10105) pail 55 gal (#C10155) drum

Details

Castle DeOdorPRO

Uses: • Auto • Marine • Trailer • Home • RV's • Hunting Gear • Basement • Paint/VOC's • Mold/Mildew • Smoke/Tobacco • Cooking/Food • Pets/Skunks • Urine • Septic/Sewer • Flood Damage Preparation & Set-Up: 1. For maximum results, place vehicle out of direct sunlight, block all windows or treat overnight. 2. Treatment temperature range is between 50° F and 90° F. Pre-heat or cool down as needed. 3. Clean & vacuum vehicle, including trunk and remove any source of odor problem. 4. Stand floor mats up on end. 5. Properly fill out supplied warning placards and secure to main entry door. Treatment: 1. Place clear plastic holder in vehicle on center console. DO NOT PLACE ON CARPET. 2. Pour HOT tap water to fill line. DO NOT OVERFILL! 3. Remove deodorizing packet from foil wrapper (do not cut packet) and gently place BLUE side facing down into the water. Packet will immediately start to expand. Leave holder OPEN during treatment. 4. After activating packet, close and lock all doors so car is air-tight. Do not enter space at any time during treatment. 5. Minimum treatment is 6 hours. For maximum results, treat overnight. Air-Out Procedure: 1. At end of treatment, open all doors and allow vehicle to air out for one-hour. 2. After initial air out CLOSE HOLDER. Remaining liquid is an oxidizer- do not spill. Dispose of holder in an outdoor refuse container. Packet is biodegradable and holder is #3 plastic & recyclable. 3. Start vehicle, turn ventilation system on high and allow the vehicle to air out with doors open for an additional 5 minutes.

Details