-
Uses: • Schools • Hospitals • Hotels / Motels • Garages • Nursing Homes • Telephones Directions: 1. Shake can well before using. 2. Hold can 6 to 8 inches away from surface to be cleaned and cover with foam spray. 3. Allow it to set one to several minutes, depending upon the severity of the job. HIV-1 (AIDS Virus) is inactivated after a contact time of five minutes at room temperature. Use a 10-minute contact time for disinfection against all other viruses, fungi, and bacteria listed on the product label. 4. Agitate with a sponge, cloth, or brush depending on the amount and tenacity of the soil, then wipe clean. Packaging: 20 oz (#C2021) 12/case -
Uses: • Carburetor • Linkage • To Free-up Heat Risers • Choke • PCV System • Small Parts Cleaner Directions: 1. Engine should be turned off and air cleaner removed. 2. Start engine and attach extension tube to valve button so that more parts of the carburetor can be reached. 3. Spray liberally. 4. Adjust air-fuel mixture. 5. Finish by cleaning outside of carburetor. Packaging: 20 oz (#C2019) 12/case -
Uses: • Intake Valves • Combustion Chamber Directions: 1. Make sure engine is warm. 2. Remove air intake boot to expose throttle plate. With the engine off, spray the throttle plate and air intake area with Castle® GDI/IVD Clean™ to remove deposits. Wipe dry with a shop towel. 3. Start engine and spray the remainder of Castle® GDI/IVD Clean™ to clean intake valves and combustion chamber by spraying the cleaner in the throttle body in bursts, while maintaining R.P.M.’s at 1200 to 1500 to prevent stalling. Packaging: 8 oz (#C0878) 12/case -
Uses: • Automotive Parts • Cutting Tools • Locks • Gearboxes • Machine Parts Directions: 1. Surfaces should be clean and dry 2. Shake can well (35-40 seconds) 3. Room temperature - hold can 6-8 inches from surface 4. Allow surface to dry before exposing to stress 5. Invert can, spray to clear nozzle when finished Packaging: 20oz (#C2065) 12/case -
Uses: • Any Vehicle Exterior • Boat Exterior • Aluminum Siding Directions for Manual Wash: Directions for Manual Wash: 1. Hose off surface to be cleaned. 2. Pour 1 cup of powder into 5 gallon bucket. 3. Hit powder with strong water pressure until suds reach top. Directions for Commercial Wash: 1. For pre-rinse, add 3 lbs. per 50 gallons of water and inject into pre-rinse station at adjusted dilution for soil conditions using hot or cold water. 2. For brush feed applications, add 2 lbs. per 100 gallons of water contained in solution tank. 3. Rinse vehicle surface before adding rinse wax to surface. Packaging: 8 lb (#C9010) tub 30 lb (#C9030) tub 90 lb (#C9090) tub 300 lb (#C90350) tub -
This product is EPA and CDC approved for use against COVID-19.
Uses: • walls • floors • nonporous surfaces Directions: 1. Follow instructions on bottle for specific uses. Packaging: 1 gal (#C39128) 4/case 5 gal (#C3905) pail 15 gal (#C3915) drum 30 gal (#C3930P) drum 55 gal (#C3955P) drum Tech Sheet -
Uses: • Terrazzo • Mastic • Asphalt • Ceramic • Concrete • Brick Directions: 1. Strip floor with Castle’s Liquid Concrete Cleaner or CCP. 2. Rinse thoroughly, allowing time to dry. 3. Apply thin coat with clean mop or wax pad. 4. Let dry and apply a thin second coat. 5. Air dry time at 77°F, 50% humidity. 6. Set to touch in 2 hours, dry hard - 24 hours. 7. Coverage is 300-500 square feet depending on porosity. Packaging: 1 gal (#C52128) 4/case 5 gal (#C5205) pail 15 gal (#C5215) drum 55 gal (#C5255) drum -
Uses: • Gears • Bearings • Hinges • Machinery Directions: 1. Surface preparation is crucial. Use Castle® Shop Solv™ to remove all grease, oil, dust and moisture 2. Shake can well for 10 seconds; make ball rattle 3. Hold can 10-15" from area to be greased. Use extension tube for pinpoint application. 4. Allow 2-3 minutes for grease to set up. Packaging: 16 oz (#C1626) 12/case Technical Details: Temperature Range: -30°F to 600°F (-34°C to 315°C)