-
Uses: • Recommended every 24,000 miles for light and medium duty diesel engines or when diesel engine is exhibiting lack of power, rough idle, poor throttle response, increased fuel consumption, and/or excessive exhaust smoke. Directions: Refer to the operating instructions for the tool with which Vac-U Diesel™ is being used (Castle® Diesel Clean™ Tool and/or the Castle® Ford EGR Cleaning Tool). Packaging: 16 oz. can 12/case -
Uses: • Any gasoline engine. • Vacu-Power™ may also be used in the Castle® Ultimate Cylinder™ for cleaning fuel rails and fuel injectors. Directions: 1. Directions are dependent on the device through which the product is distributed. Please see included instructions. Packaging: 16 oz (#C1637) 12/case -
Uses: • Adhesive Wheel Weights Directions: 1. Shake can vigorously for one minute after mixing ball begins to rattle 2. Spray 8 to 12 inches from surface 3. Remove wheel weight gasket adhesive with a microfiber cloth to prevent scratching surface 4. Rinse surface 5. Repeat above if necessary Packaging: 20oz (#C2080) 12/case -
Uses: • White Wall Tires • Black Wall Tires Directions: 1. Wet the tire. 2. Spray on. 3. Brush with stiff bristle brush. 4. Hose off. 5. Do not apply full strength to aluminum or magnesium wheels. Dilute 2 oz. per 16 oz of water. 6. Wet wheel first. 7. Apply diluted cleaner. 8. Brush with soft bristle brush. 9. Rinse. Do not let mixture sit for long periods of time. Packaging: 1 gal (#C72128) 4/case 5 gal (#C7205) pail 15 gal (#C7215) drum 30 gal (#C7230) drum 55 gal (#C7255) drum -
Uses: • Rust Prevention • Auto Undercoat • Trailer Undercoat • Tree Wound Dressing • Wood Fence Post Preserver • Eaves, Troughs & Flashing Sealer Directions: 1. Shake product well before and during use. 2. Spray, holding can 8 to 10 inches from surface, using smooth and easy movement. 3. Coating will dry in about 2 hours. 4. Clean valve by inverting can and spraying until only pressure escapes. Packaging: 24 oz (#C2401) 12/case -
Uses: • Electric Motors • Generators • Starter Motors • Relays • Circuit Breakers • Instruments • Rheostats Directions: 1. Shake well. 2. Hold 6 - 8 inches from surface to be cleaned. 3. Spray from top to bottom to flush dirt away. 4. Avoid use on PVC, ABS, acrylic styrenes and polycarbonates. Pre-test on all plastic surfaces. Packaging: 16 oz (#C1629) 12/case -
Directions:- Use 1 ounce per gallon in a wash bucket and add water using pressure from the hose nozzle.
- Wash vehicle with a clean sponge, soft rag, wash brush, or mitt that does not contain silicone from tires (silicone is a defoamer).
- A small amount may be used without diluting with water for super stubborn stains.
- Rinse to a spot-free finish.