-
Uses: • Bonding various materials. Directions: 1. Surface must be clean and dry. Working surface and can must be at room temperature (60°-65°F). 2. Protect areas from overspray. 3. Adjust nozzle to desired width and direction. 4. Hold can 5”-7” from surfaces and spray both surfaces to be bonded with an overlapping motion. 5. Allow solvent to escape for 2-3 minutes, but not more than 15 minutes. 6. Encourage bonding by applying firm pressure. 7. When finished, invert can and spray to clean nozzle. Packaging: 20 oz (#C2041) 12/case -
Uses: • Flying and crawling insects. Directions: 1. The best time to spray the nest is in the early morning or early evening, when air temperature is cooler and most insects are in the nest and little activity is observed around the nest opening. Packaging: 20 oz (#C2029) 12/case -
Uses: • Cars & trucks Directions: 1. Keep container tightly sealed when not in use. 2. Product will absorb water from air. Store in a cool, well ventilated area. 3. Keep away from oxidizing materials. Packaging: 1.5 oz (#C33002) 24/case 1 gal (#C33128) 4/casea -
Uses: • Recommended every 24,000 miles for light and medium duty diesel engines or when diesel engine is exhibiting lack of power, rough idle, poor throttle response, increased fuel consumption, and/or excessive exhaust smoke. Directions: Refer to the operating instructions for the tool with which Vac-U Diesel™ is being used (Castle® Diesel Clean™ Tool and/or the Castle® Ford EGR Cleaning Tool). Packaging: 16 oz. can 12/case -
Uses: • Electric Motors • Generators • Starter Motors • Relays • Circuit Breakers • Instruments • Rheostats Directions: 1. Shake well. 2. Hold 6 - 8 inches from surface to be cleaned. 3. Spray from top to bottom to flush dirt away. 4. Avoid use on PVC, ABS, acrylic styrenes and polycarbonates. Pre-test on all plastic surfaces. Packaging: 16 oz (#C1629) 12/case -
Uses: • Any gasoline engine. • Vacu-Power™ may also be used in the Castle® Ultimate Cylinder™ for cleaning fuel rails and fuel injectors. Directions: 1. Directions are dependent on the device through which the product is distributed. Please see included instructions. Packaging: 16 oz (#C1637) 12/case -
Uses: • Recyclable, non-chlorinated, multi-purpose solvent. Directions: 1. Since the product is flammable, do not use on any hot surface or around sparks or open flame. 2. Shake well. 3. Direct spray on surface to be cleaned and spray liberally. 4. Allow to dry. Packaging: 8 oz (#C0894) 12/case 20 oz (#C2094) 12/case 24 oz (#C2495) 24/case 5 gal (#2494-5) pail 15 gal (#2494-15) drum 55 gal (#C2494-55) drum -
Uses: • Any fuel injected gasoline engine. Directions: 1. Follow directions on can for best results. Packaging: 20 oz (#C2037) 12/case -
Uses: • Auto • Marine • Factories • Truck • Lawn Mowers • Parts Cleaner • Aircraft • Recreation Vehicles • Heavy Equipment Directions: 1. Engine should be warm not hot. 2. Ignition should be turned off. 3. Remove air cleaner. 4. Cover distributor cap with plastic (freezer or sandwich bags are ideal) or other waterproof material. 5. Products can be applied using aerosol can or bulk product with low pressure spray tank. Packaging: 20 oz (#C2008) 12/case 5 gal (#C8005) pail 55 gal (#C8055) drum -
Uses: • Parts Washers • Dip Tanks • Wipe Cloths • Sprayers Directions: 1. ID/4R™ can be used 50:50, 2 to 1 or 3 to 1. Packaging: 5 gal (#FLSC9805) pail 15 gal (#FLSC9815) drum 30 gal (#FLSC9830) drum 55 gal (#FLSC9855) drum -
Uses: • Late model cars and trucks • Conventional vehicles Directions: 1. See back label for application specific to problem. Packaging: 20 oz (#C2027) 12/case -
Uses: • Carburetor • Linkage • To Free-up Heat Risers • Choke • PCV System • Small Parts Cleaner Directions: 1. Engine should be turned off and air cleaner removed. 2. Start engine and attach extension tube to valve button so that more parts of the carburetor can be reached. 3. Spray liberally. 4. Adjust air-fuel mixture. 5. Finish by cleaning outside of carburetor. Packaging: 20 oz (#C2019) 12/case
